| 王帅,孙杰,陈诚,魏海国,丑凌军,杨建,宋焕玲.制备方法对Pt-Sn-K-Mg/γ-Al2O3催化剂正十二烷脱氢性能的影响[J].分子催化,2024,38(2):130-138 |
| 制备方法对Pt-Sn-K-Mg/γ-Al2O3催化剂正十二烷脱氢性能的影响 |
| Influence of Preparation Methods on n-Dodecane Dehydrogenation Performance of Pt-Sn-K-Mg/γ-Al2O3 Catalysts |
| 投稿时间：2023-12-08 修订日期：2023-12-30 |
| DOI：10.16084/j.issn1001-3555.2024.02.005 |
| 中文关键词: 长链烷烃 脱氢 PtSn合金 浸渍顺序 溶剂效应 |
| 英文关键词:long-chain alkanes dehydrogenation PtSn alloy impregnation sequence solvent effect |
| 基金项目:国家自然科学基金项目(No. 21573260)(National Natural Science Foundation of China (No. 21573260)). |
|
| 摘要点击次数: 0 |
| 全文下载次数: 0 |
| 中文摘要: |
| 以正十二烷脱氢反应为探针反应, 采用顺序浸渍、乙醇共浸渍、盐酸共浸渍的方法制备了Pt-Sn-K-Mg/γ-Al2O3催化剂, 并采用NH3-TPD、CO脉冲吸附、H2-TPR、准原位XPS等表征手段探究浸渍顺序和溶剂对催化剂构效关系的影响. 结果表明, 盐酸水溶液共浸渍的方法制备的催化剂表现出了最佳的初始活性和较好的稳定性. 催化剂的弱酸性位点的增加有利于Pt的分散, 从而提高催化性能. 采用乙醇为溶剂的共浸渍方法更有利于PtSn间形成更强的相互作用生成更多的PtSn合金, 这对初始活性不利, 但对选择性影响较小. |
| 英文摘要: |
| Pt-Sn-K-Mg/γ-Al2O3 catalysts were prepared by sequential impregnation, ethanol co-impregnation and hydrochloric acid co-impregnation using n-dodecane dehydrogenation as a probe reaction, and the effects of impregnation sequence and solvent on the structure-activity relationship of the catalysts were investigated by using characterization methods such as NH3-TPD, CO pulse adsorption, H2-TPR and quasi-in situ XPS. The results showed that the catalyst prepared by co-impregnation with hydrochloric acid aqueous solution exhibited the best initial activity and better stability. The increase of weakly acidic sites of the catalyst facilitated the dispersion of Pt, which improved the catalytic performance. The co-impregnation method using ethanol as the solvent is more favorable to the formation of stronger interactions between PtSn to generate more PtSn alloys, which is unfavorable to the initial activity but has less effect on the selectivity. |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
